Key takeaways
- Call 811 before any digging, even for low-voltage lighting.
- Line-voltage electrical work needs qualified electricians and may need permits.
- HOAs and historic districts may regulate fixtures, colors and brightness.
- Check a contractor's license status with the state.
Call before you dig
Installing lighting means digging trenches for cable. Underground utilities such as gas, water, electric and communication lines can be shallow. Tennessee 811 is a free service that marks buried utilities, and you should contact it a few days before any digging begins.
A professional installer will do this as a matter of course.
Permits and electrical work
Low-voltage landscape lighting often does not need a permit, while line-voltage work such as new circuits, outdoor outlets and fixtures wired to the house usually does and must be done by qualified electricians. Rules vary by city and county, so check with your local codes office. In Nashville, the city codes department handles Davidson County, and other cities and counties have their own offices.
Pools, spas and fountains have extra safety rules.
HOA and historic rules
Many neighborhoods require approval for exterior changes, and some limit fixture type, color temperature, brightness or hours of operation. Historic districts may restrict visible changes. Read your covenants, submit samples and details and keep approvals in writing.
A contractor who provides samples and specifications makes approvals easier.
Choosing a contractor
Tennessee requires contractor licensing for projects above certain limits, and the state publishes ways to check a contractor's status. Ask for references, a written scope with fixtures, transformer size and plain descriptions of the work and a plan for aiming at night.
Be cautious about pressure to decide immediately.
Official sites to explore
Brand names and logos belong to their owners. These links open the official websites in a new tab, and we are not affiliated with them.
- Tennessee 811: Call Before You DigFree service to mark buried utilities before you dig.
- Metro Nashville CodesPermits and codes for Nashville and Davidson County.
- Tennessee Board for Licensing ContractorsState board that regulates contractor licensing.
- Tennessee License VerificationState lookup for checking a contractor license.
- National Fire Protection AssociationPublisher of the National Electrical Code and safety resources.
Quick answers
Do I need to call 811 for low-voltage lighting?
Yes. Any digging should be preceded by a call so buried utilities are marked.
Does landscape lighting need a permit?
Low-voltage systems often do not, but line-voltage work usually does. Check with your local codes office.
Can my HOA restrict outdoor lighting?
Many can. Read your covenants and request approval in writing.




