Skip to main content
615 Outdoor Lighting, outdoor lighting company in Nashville TN 615-431-3789

How it works

Low-Voltage Lighting Explained: Transformers, Cable and Voltage Drop

How 12-volt landscape lighting works, why transformer size and cable matter and what causes dim and flickering lights.

2 minute read

Key takeaways

  • A transformer steps household power down to a safe 12 volts.
  • The transformer must be sized for the total fixture wattage with room to grow.
  • Long cable runs lose voltage, which dims the far fixtures.
  • Good connections and the right cable keep a system reliable.

What low-voltage means

Most landscape lighting runs on 12 volts instead of the 120 volts in your walls. A transformer plugged into an outdoor outlet or wired to a circuit steps the power down. Low-voltage cable is safer to bury and handle, and fixtures are small and easy to move.

Line-voltage wiring, such as running a new circuit to the transformer, should be done by a qualified electrician.

Sizing the transformer

Add up the wattage of every fixture on the system and choose a transformer with some room above that total. Running a transformer at its limit shortens its life and leaves no room to add lights. Multi-tap transformers let you balance voltage for different runs.

LED systems use so little power that small transformers can run many fixtures.

Voltage drop

Electricity loses voltage as it travels along a cable, especially thin cable over long runs. The result is dimmer lights at the far end. Fixes include heavier cable, shorter runs, a different tap on the transformer or splitting the system between two transformers.

Planning runs before installation avoids the problem.

Connections

Most problems come from connections. Weatherproof, gel-filled or sealed connectors keep water out. Poor twist-on connectors corrode and fail. Burying cable at a sensible depth and away from digging areas protects it.

Keep a map of cable runs so future digging avoids them.

Quick answers

Is low-voltage lighting safe?

It is much lower in voltage than household power, though it still has safety rules and should be installed carefully.

Why are my last lights dim?

Voltage drop on a long run is a common cause.

Can I run all lights on one transformer?

If it is large enough and the runs are planned. Many systems use more than one.

Related services

Questions about your project?

Call, text or send the form. Tell us about the property, what the lighting is doing and when you hope to start, and we will take it from there.

615-431-3789Text