Skip to main content
615 Outdoor Lighting, outdoor lighting company in Nashville TN 615-431-3789

Landscape Lighting Design & Installation

Path and walkway lighting that guides guests safely to the door with soft pools of light

Path lights place gentle pools of light along walkways and drives so steps, edges and turns are easy to see.

Call or text today615-431-3789

Request a lighting visit

Tell us about your project. We will contact you to confirm the details and set up a time to visit.

Or call 615-431-3789

By sending this you agree that we may contact you about your project. See our Privacy Policy.

Prefer to type? Text your request to 615-431-3789

Path & Walkway Lighting

Walkways are the first place most people notice lighting, and the first place it can go wrong. Fixtures spaced too closely create a runway, fixtures that are too bright cause glare and fixtures that are too far apart leave dark patches. Good path lighting places shielded fixtures so the light lands on the ground and the stones, not in your eyes.

We choose fixtures that suit your home and set them at the right height and spacing along walks, drives and garden paths across Nashville and Middle Tennessee. We stagger fixtures on alternate sides, tuck them into plantings and shield the lamp so you see the glow, not the bulb.

What you get

Done right, from the first walk-through

01

Right-height fixtures

Low path lights sized to your plants and walkway.

02

Staggered spacing

Overlapping pools of light, never a runway.

03

Shielded beams

Light directed down and out, not into your eyes.

04

Durable finishes

Solid brass, copper or aluminum for the long run.

The process

How your service comes together

  1. 1

    Walk the route

    We walk the path as a guest would and mark turns, steps and edges.

  2. 2

    Place the fixtures

    Fixtures are staggered, aimed and hidden in plantings.

  3. 3

    Check at night

    We adjust each light after dark for coverage without glare.

FAQ

Common questions about path & walkway lighting

How far apart should path lights be?

Often about six to ten feet, staggered, but it depends on the fixture and the effect. We plan it for your path.

Will path lights get hit by the mower?

Low fixtures set in beds or just off the edge usually stay clear, and we place them with that in mind.

Can path lights be moved?

Yes. Low-voltage fixtures can be repositioned as plants grow.

Let us help with your path & walkway lighting

Call, text or send the form. Tell us about the property, what the lighting is doing and when you hope to start, and we will take it from there.

615-431-3789Text